Snap-On PRO-LINK EDGE - Vehicle Scan

20 PRO-LINK
®
Edge Hardware and Software User’s Manual
Chapter 2 • Hardware and User Interface Overview
Vehicle Scan
When you select Vehicle Scan from the Main Menu, the following screen is
displayed:
The following scanning options are available:
• HD Scan (Au
to)—Scans the vehicle, presents a list of ECMs detected
during scanning (J1708 and J1939), and enables you to select up to six
(6) modules from the list.
• LM
T—Begins the Light and Medium Truck scanning process.
NOTE:
i A Manual Scan feature is also available. See “Manual Scan” in Chapter 8:
Using the Support Menu, later in this manual.
NOTE:
i For detailed information on scanning a vehicle, see Chapter 4: Using the
Diagnostics Menu, later in this manual.
Figure 2.7 Vehicle Scan Menu