Snap-On PRO-LINK EDGE - Page 184

- Utilities Overview
PRO-LINK
®
Edge Hardware and Software User’s Manual 183
These buttons are on the Now Recording screen (Figure 9.4).
Button
What it does
STOP • Ends a recording (you need to confirm that you
want the recording to end).
• Returns you to the Record screen (Figure 9.2).
• Changes to EXIT once you stop the recording; the
EXIT button takes yo
u ba
ck to the list of parame-
ters (Figure 9.1).
View Real Time • Warning: Not r
ecommended if you are operating
the vehicle.
• Enables you to view a graph of the selected param-
eters while the recording file
as
it is being recorded.
You can take a bookmark in Real Time.
A number of buttons are available:
• Change Parameters—takes yo
u
to the Select a
Category screen. This gives you the ability to
change both the category of parameters and/or the
parameters you want to view. You can also create
a Quick List and view playback for only the param-
eters on the list. Touch Vie
w
Results to return to
return to the Real Time view.
Note:
All parameters are being recorded even
th
ough they are not currently viewed.
• Back Arrow—takes you back to the Record Mode
screen (the recording is still in progress).
View Results • Enables you to review in Playback Mode the re-
cording you created.
• You must confirm that you want to stop the record-
ing prior to viewing results.
A number of buttons are available:
• Rewind—
e
nables you to rewind to the start of
the recording.
• Play—st
arts the recording. Ch
anges to the
Pause button once the playback begins.
• Pre
vious Bookmark a
nd Next Bookmark—
enable you to jump from one bookmark to the
next.
• EXIT—takes yo
u ba
ck to the Record screen
(Figure 9.2).