203 PRO-LINK
®
Edge Hardware and Software User’s Manual
Chapter 10 • Using PRO-LINK® Repair-Connect
i It can be helpful (especially with large and complex wiring diagrams) to
position the image in the center of the screen prior to printing it as only the
current screen view will print. To do so, touch the screen and drag your
finger to position the image.
4 (optional) Touch Print to send the current screen view to the printer.
5 Use the Back
Arrow to return to the list of wiring diagrams.
Figure 10.15 List of Wiring Diagrams
6 Touch the screen to select Locator: Boost Temperature Sensor to view a
diagram/photograph of the sensor.
To Next Page
Loading...
