socomec ATyS p M - Programming Mode

38
EN
ATySpM - 542935E - SOCOMEC
13.5.3. Programming mode
Depending on the type of application managed (Network-Network or Network-genset), some parameters in the
SETUP menu may not be displayed.
For more details on the various operations, see sections «13. OPERATION», page 31, «13.2. Manual mode», page
32, «13.6. Automatic mode», page 54.
1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2
1 2
1 2
1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2
1 2 1 2 1 2
1 21 2
1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2
1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2
1 2
1 2 1 2 1 2
1 2
1 2 1 2
1 2
1 2
21
1 2
1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2
1 2
1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2
1 2 1 2
1 2 1 2 1 2
(1) (7)
(1) (1) (3) (3) (3) (4) (4)
1 2
(4) (6)
1 2
(1) (3) (2)
(2) (8) (1) (1) (8) (1)
(5) (5) (5) (5)
(9) (9) (9)
(5)
1 2
Configure
parameters
Configure voltage
thresholds and
hysteresis
Frequency thresholds
and hysteresis
configuration
Timer configuration
Input - output
configuration
Communication
configuration