socomec ISOM Digiware - TE Solid-Core Current Sensors

20 EN
ISOM DIGIWARE - 546780C - SOCOMEC
STAGE 2
1
2
STAGE 1
4.2.3. TE solid-core current sensors
The TE solid-core current sensors are used to set up measurement points in a new or existing installation. They are
easy to integrate as they are compact and respect the pitch of the circuit breakers. A wide range of accessories are
also available for direct tting on all type of cabling (cable, exible or rigid busbar) or on a DIN rail support or plate.
Thanks to the specic link, they are recognised by the ISOM Digiware and a high level of overall accuracy for the
measurement chain is guaranteed.
4.2.3.1. Range
TE-18 TE-18 TE-25 TE-35 TE-45 TE-55
Pitch 18 mm 18 mm 25 mm 35 mm 45 mm 55 mm
Nominal
current
range In
5 to 20 A 25 to 63 A 40 to 160 A 63 to 250 A 160 to 630 A 400 to 1000 A
I max 24 A 75.6 A 192 A 300 A 756 A 1200 A
Reference 4829 0500 4829 0501 4750 6052 4829 0503 4829 0504 4829 0505
TE-90
Pitch 90 mm
Nominal
current
range In
600 to 2000 A
I max 2400 A
Reference 4829 0506