socomec ISOM Digiware - Digiware Bus Repeater Usage

50 EN
ISOM DIGIWARE - 546780C - SOCOMEC
7.2.3. Digiware bus repeater
Whenever the power consumption is higher than 15 or 20 W (depending on the type of power supply used) or the
distance is greater than 100 m, a DIRIS Digiware C-32 repeater is required. In an ISOM Digiware system, a maximum
of 2 repeaters may be used.
DIRIS Digiware
C-32 repeater
Reference
4829 0103
Conguration example:
100 m max
or power consumption 20 W max
100 m max
or power consumption
20 W max
Digiware Bus Termination
ISOM Digiware D-x5
24 VDC power supply 24 VDC power supply
U-xx L-60 C-32 F-60
The DIRIS Digiware U voltage module must be located upstream of the repeater.
The repeater requires a 24VDC power supply.
DIRIS Digiware C-32
Supply 24VDC
24VDC
DIGIWARE BUS
RJ45
INOUT