socomec ISOM Digiware - I;O Configuration with Easy Config

63EN
ISOM DIGIWARE - 546780C - SOCOMEC
10.1.2.4. Conguration of inputs-outputs (I/O)
The ISOM L-60 has 4 I/Os which are fully congurable.
In this screen you can set each I/O separately:
1) Function of the I/O
Denes if it is used as an input or an output
2) Name:
Name the I/O
3) Mode:
Denes the I/O operating mode:
As an input, you can set the following 4 modes:
• Injection cutoff
• External TEST
• External RESET
• Measurement restart
4) Type:
Denes if it is active, either in an open or closed state.