socomec ISOM Digiware - Calculation Method Configuration; Product Time Synchronization

66 EN
ISOM DIGIWARE - 546780C - SOCOMEC
10.1.2.6. Calculation method
The calculation methods for the various electrical parameters and the integration time are dened in this screen.
Alarms
The type of alarm and the conguration are set in Easy Cong, see section "11. ALARMS", page 68 for more.
10.1.2.7. Synchronisation of products
Ensure that all connected devices are set to the same time, their time is controlled on an SNTP server (ISOM
Digiware D-55 / D-75) or manually (ISOM Digiware D-55 / D-75).
The screen below shows the conguration of the update from the ISOM Digiware D-75 screen. The update is done
either from an SNTP server or manually. The time may be displayed on connected products automatically based on a
congurable update schedule.