SolarEdge storedge User Manual

Appendix E: Additional Battery Connections
Thisappendixprovidesadditionaloptionsforconnectingbatteriestotheinverter.
PayattentiontothewirecolorsandDIPswitchsetupofthebatteries(refertoDIPSwitchSetuponpage38).MakesurethefirstandlastdeviceontheRS485bus
isterminated.
Connection with One Battery
LG Chem RESU10H (StorEdge Connection Unit with 2 DIPSwitches)
Figure 49: Connections to LG Chem RESU10H battery (StorEdge Connection Unit with two DIP-switches)
Appendix E: Additional Battery Connections
SolarEdge-StorEdge Installation Guide MAN-01-00262-1.2
104

SolarEdge storedge Specifications

General

Type	Hybrid Inverter
Topology	Transformerless
Battery Compatibility	LG Chem, Tesla Powerwall
Communication Interfaces	RS485, Ethernet
Frequency	50 Hz / 60 Hz
Operating Temperature	-25°C to 60°C
Cooling	Convection cooling