SolarEdge storedge User Manual

Connecting Communication to the Meter
Ifameterwasinstalled,connectittotheStorEdgeConnectionUnitasdescribedinthefollowingtable.
Fordetailedinformationrefertotheinstallationguidesuppliedwiththemeter.
Recommended cable type
(min-max AWG)
StorEdge Connection
Unit
Meter connection
RS485 24 AWG (16-24 AWG),
shielded twisted pair, 600V
insulated
Ext. Devices 7-pin terminal
block: B, A, G
RS485 4-pin terminal block: B, A, G
Connectasillustratedbelow:
Figure 24: Connection to a meter
SolarEdge StorEdge Installation Guide MAN-01-000262-1.2
40
Connecting Communication to the Meter

SolarEdge storedge Specifications

General

Type	Hybrid Inverter
Topology	Transformerless
Battery Compatibility	LG Chem, Tesla Powerwall
Communication Interfaces	RS485, Ethernet
Frequency	50 Hz / 60 Hz
Operating Temperature	-25°C to 60°C
Cooling	Convection cooling