What causes 'External blocking' on SolarMax Inverter?
The 'External blocking' message on your SolarMax Inverter indicates a 0% command from MaxRemote, which is coming from the grid operator. You must wait until the grid operator suspends the blocking of the inverter via MaxRemote.
What to do if SolarMax MT displays 'Program Firmware'?
If your SolarMax Inverter displays 'Program Firmware', it means the inverter firmware is currently being updated. The inverter automatically resumes mains operation once the firmware update is complete.
What does 'RTC error' mean on SolarMax MT Inverter?
The 'RTC error' on your SolarMax Inverter indicates that the real-time clock in the inverter is malfunctioning, and the date and time have been reset. If this problem happens frequently, contact the SolarMax Service Centre. Set the time and date correctly.
Manual is intended for PV plant operators and qualified electricians.
The manual must remain accessible; updated versions are downloadable.
Explanation of DANGER, CAUTION, and NOTE symbols used within the manual.
Defines the intended application of inverters and prohibits unauthorized modifications.
Illustrates and explains safety and operational symbols found on the inverter unit.
Illustrates the physical components and connection points of the inverter unit.
Provides the physical dimensions of the inverter unit in millimeters.
Presents a schematic of the inverter's internal electrical connections and components.
Guidelines for safely transporting and storing the inverter unit.
Recommendations for selecting an optimal installation location for the inverter.
Discusses the requirements for effective lightning protection for the PV plant.
Lists all components and accessories included in the inverter package.
Details the step-by-step process for physically mounting the inverter unit.
Covers all aspects of connecting the inverter to electrical sources and networks.
Provides step-by-step procedures for safely powering the inverter on and off.
Guides through the mandatory initial setup process for new inverters.
Overview of the inverter's display, including navigation and status information.
Visual representation of the inverter's menu hierarchy and navigation paths.
Displays the three most important operating values and the current system status.
Provides access to various menu levels for inverter operation and configuration.
Accessing real-time inverter measurements such as voltage, current, and power.
Accessing historical operational data logged by the inverter.
Guidance on navigating and modifying the inverter's operational settings.
Configuration options for the status signalling contact's functionality.
Procedure to initiate the automatic grid compliance test for the inverter.
Details the steps and displayed values during the automatic grid test.
Explains the inverter's status messages and LED indicator meanings.
Describes messages and indicators during the inverter's startup phase.
Details status messages related to grid connection and power feed-in.
Symbols indicating data communication status via RS485 or Ethernet.
Contact details and required information for technical support and service inquiries.
Guides for diagnosing and resolving common inverter failures and warnings.
Lists the electrical input specifications for various inverter models.
Details the electrical output specifications for various inverter models.
Presents the efficiency ratings of the different inverter models.
Specifies operating temperature, humidity, and altitude limits for the inverters.
Details display type, DC disconnector, circuit type, and data logger specifications.
Lists EMC and grid connection standards the inverters comply with.
Describes the communication and signalling interfaces available on the inverters.
Provides the physical weight and dimensions for each inverter model.
Outlines the standard warranty period and terms applicable to the inverters.
Information on default factory settings tailored for different countries.
Graph showing efficiency versus standardized output for the 15MT3 model.
Graphs illustrating how ambient temperature affects inverter output power.
Outlines the manufacturer's guarantee policy, terms, and conditions.
Details the scope and duration of the standard manufacturer's warranty.
SolarMax's commitment to repair or replace devices during the warranty period.
Lists specific conditions and events that will cancel warranty claims.
Describes the required procedure for making a warranty claim.
Conditions under which SolarMax may temporarily or finally exclude the guarantee.
Information on purchasing extended warranty periods for devices.
To Next Page
General
