SON PXW-FX9V - Page 77

74
2. Disconnect the flexible flat cable from the connector (CN4201) on the LE-428 board.
3. Disconnect the harness from the connector (CN101) on the DC-185 board.
4. Remove the five precision screws, and then remove the rear assembly.
5. Install the removed parts by reversing the steps of removal.
Precision screws
(P2 x 4)
Precision screws
(P2 x 4)
LE-428 board
DC-185 board
Rear assembly
CN4201
Harness
Flexible flat cable
CN101