34 Chapter 4: Setup and Operation
OB Custom Measurements
Figure 16 Setup Screen: OB Custom Measurements
OB Custom
Measurements
1 Press the Setup key.
2 Select OB Custom Meas.
3 Select New.
4 In the Name field, enter a unique name.
5 In the Type list, select the desired measurement type.
6 Select Save.
The new measurement is displayed in the calculations menu and the OB report.
Up to five custom measurements may be saved.
Delete OB Custom
Measurement
1 Press the Setup key.
2 Select OB Custom Meas.
3 In the Custom Measurements list, highlight the last measurement.
4 Select Delete Last.
Note: If associated tables and report data exist for the measurement, they will be
removed from the system.
Tables... Select Tables... from the on-screen menu to create Gestational Age tables for a
custom OB measurement. See “OB Custom Tables”.
To Next Page
Loading...