Chapter 4: Setup and Operation 35
OB Custom Tables
Figure 17 Setup Screen: OB Custom Table
Age Table Measurements: The system provides gestational age measurements by selected authors for the age
table measurements listed in Table 4.2.
Growth Analysis Table Measurements: The system provides growth graphs or curves for the growth table
measurements listed in Table 4.2.
Table 4.2: OB Custom Table Measurements
Age Table Measurements GS, CRL, BPD, OFD, HC, TTD, AC, FTA, FL, 5 additional custom
measurement labels
Growth Analysis Table Measurements BPD, HC, AC, FL, EFW
WARNING:
Prior to use, verify custom table data entries are correct. The system does not confirm the
accuracy of the custom table data entered by the user.
View OB Tables 1 Press the Setup key.
2 Select OB Custom Meas. or OB Calculations.
3 Select Tables... from the on-screen menu.
4 Select the desired table (Age or Growth) and measurement/author.
Create New OB Custom
Tables
1 Press the Setup key.
2 Select OB Custom Meas. or OB Calculations.
3 Select Tables... from the on-screen menu.
4 Select the desired table (Age or Growth).
5 In the measurement list, select the desired measurement for the custom table.
6 Select New from the on-screen menu.
7 In the Author field, enter a unique name.
8 Enter the data.
9 Select Save from the on-screen menu.
Two custom tables may be created for each OB measurement.
Note: To display the measurement for the custom table in the calculation menu,
see “OB Calculations Authors” on page 33 and select More...
Note: Growth analysis tables cannot be created for custom OB measurements.
To Next Page
Loading...