SonoSite MicroMaxx - Setup

Chapter 4: Setup and Operation 23
System Components
The SonoSite system components are identified in “About the System” on page 2.
Setup
System setup is used to customize the system. Press the Setup key to access and set up the following system
functions:
20
Modes
M Mode Turns M Mode on and toggles between M Mode sample line and the M Mode
trace.
Doppler Turns Doppler on and toggles between Doppler sample line and the Doppler
trace.
Color Turns CPD/Color on and off.
2D Turns 2D on.
Table 4.1: System Controls (Continued)
Number System Control Description
Administration Configure system to protect patient data by requiring users to log on and
enter passwords.
Audio, Battery Configure for type of Audio alert, Sleep delay, and Power delay.
Connectivity Configure Printer, Video mode, Serial Port, and Transfer Mode: DICOM or
SiteLink.
(DICOM and SiteLink are optional features.)
Date and Time Configure Date and Time functions.
Delta Key, F Keys Configure existing system functionality as a shortcut and create predefined
labels for images.
Display Information Configure information displayed on image: patient information, mode data,
and system status data.
IMT calculations Configure the IMT calculation menu and presets.
OB Calculations Select OB calculation authors.
OB Custom Measurements Configure system for user defined measurements.
(OB Custom Measurements are an optional feature.)
Presets Configure Preset functions: Doppler Scale, Duplex, Live Trace, Thermal
Index, Save Key, and Dynamic Range.
System Information Displays system hardware and software versions.