Working Instructions (mech)
1225-1010 Rev 1
Replacement
4.18 Shield Can Lid BB
Follow the 3.1 – 3.4 Disassembly instructions!
Carry out the replacement as described below.
Follow the 5.7 – 5.10 Reassembly instructions!
REMOVAL
Insert the dentist hook into the corners of the Shield Can Lid
and pull upwards to release it,
and remove it.
INSTALLATION
Place the Shield Can Lid on top of the Shield Fence and
press gently until it is securely attached.
© Sony Ericsson Mobile Communications AB – Company Internal
35(70)
To Next Page
Loading...
