Note
Depending on the direction of the camera and the zoom position, part of the unit or cables connected to the connector block may be
visible. Before shooting, check the range that will be captured. You can also control the pan/tilt range using [Pan-Tilt] – [P/T Range
Limit] in the web menu. When the unit is turned on or pan/tilt reset is executed, this range limit setting is ignored. For details, see [Pan-
Tilt] – [P/T Range Limit] in the web menu.
Hint
You can also control the framing using the supplied infrared remote control.
TP1001804492
5-065-326-11(1) Copyright 2024 Sony Corporation
Preset position control panel / Composition preset control panel1.
(Main) tab / (Others) tab2.
Framing control panel or AFR composition adjustment panel3.
To Next Page
