Help Guide
Color Video Camera
BRC-AM7
Setting the Pan/Tilt Operating Speed
You can change the pan/tilt operating speed using the [Pan-Tilt Speed] slider in the camera control panel by operating the
joystick in the framing control panel.
Note
If there is a wall or other obstacle within the range of motion of the camera, be careful not to hit the camera head during pan/tilt
operation.
You can change the pan/tilt acceleration setting using [Pan-Tilt] – [P/T Acceleration] – [Ramp Curve] in the web menu or camera menu.
TP1001804494
5-065-326-11(1) Copyright 2024 Sony Corporation
Press the
(Main) tab in the camera control panel.
1
Select the [Pan-Tilt Speed] slider from the list.
If the [Pan-Tilt Speed] slider is not displayed, select either of the two slider function selection buttons to display the
slider.
2
Move the slider knob left or right.
Moving the knob to the left decreases the operating speed, while moving the knob to the right increases the operating
speed.
3
To Next Page
Loading...
