Help Guide
Color Video Camera
BRC-AM7
Adjusting Automatically in Variable Mode
You can enable auto exposure adjustment using the ND filter.
Note
When the ND filter is switched to or from [Clear] during shooting, the ND filter frame is displayed on the image and an operating sound
is emitted.
Hint
You can also assign [Auto ND Filter] to an assignable button, and press the button to switch between [Auto] and [Manual].
TP1001804539
5-065-326-11(1) Copyright 2024 Sony Corporation
Set [Shooting] – [ND Filter] – [Mode] to [Variable] in the camera menu.
1
Press the [ND Filter] button in the camera basic configuration panel.
The frame of the [ND Filter] button changes to orange.
The ND Filter adjustment panel appears.
2
Press the [ND Filter] button and select [Auto] from the list.
The automatically adjusted ND filter transmittance value is displayed beside the [ND Filter] button.
3
To Next Page
