Help Guide
Color Video Camera
BRC-AM7
[Tally]
Sets recording/tally lamp settings (see “Connecting a Tally Signal”).
Related Topic
Connecting a Tally Signal
TP1001804643
5-065-326-11(1) Copyright 2024 Sony Corporation
Item Sub-item setting
Factory
default
Description
[Tally Lamp
Brightness]
[High] / [Low] / [Off] [High] Sets the brightness of the recording/tally lamp.
[G Tally Lamp]
[Enable] / [Disable] [Enable] Enables/disables the G (green) tally lamp.
[Y Tally Lamp]
[Enable] / [Disable] [Enable] Enables/disables the Y (yellow) tally lamp.
[Tally Control]
[External] / [Internal] /
[PTZ AFR]
[Internal]
Selects the target for accepting the recording/tally lamp
control information of the unit.
[External]: Tally control from outside the camera (tally
lamp).
[Internal]: Control via camera recording operation
(recording lamp).
[PTZ AFR]: Control via the PTZ AFR operating status.
To Next Page
Loading...
