Information displayed on the screen during playback
The following information is superimposed on the playback picture.
Audio level meter
Displays the audio level of each channel.
22.
Video signal monitor
Displays a waveform, vectorscope, and histogram.
The orange line indicates the set value of the brightness level marker.
In log shooting mode, the monitor target LUT type is displayed above the display.
For details, see “Video Signal Monitor.”
For details about log shooting mode, see “Setting the shooting mode” in “Configuring Basic Operation.”
23.
Monitoring look indicator
In log shooting mode, it displays the monitor LUT setting.
For details about the LUT setting, see “Shooting with Look Adjustment in Post-Production” and related topics.
For details about log shooting mode, see “Setting the shooting mode” in “Configuring Basic Operation.”
24.
Base look/recording look indicator
Displays the base look setting.
In log shooting mode, it displays the video signal to record on the memory cards.
For details about the base look, see “Look Overview” in “Shooting with the Desired Look.”
For details about log shooting mode, see “Setting the shooting mode” in “Configuring Basic Operation.”
25.
Proxy status indicator26.
Recording format (codec) indicator
Displays the name of the format for recording on the memory cards.
Set the recording format (codec) using [Project] – [Rec Format] – [Codec] in the web menu or camera menu.
27.
Recording format (frame rate and scan method) indicator28.
Recording format (picture size) indicator
Displays the picture size for recording on the memory cards.
Set the recording format (picture size) using [Project] – [Rec Format] – [Video Format] in the web menu or camera menu.
29.
Tally indicator
Displays a red, green, or yellow frame around the image according to the received external tally signal.
30.
To Next Page
Loading...
