Help Guide
Color Video Camera
BRC-AM7
Using PoE++ Power
When the unit is connected to a PoE++ compatible power delivery device, power is supplied to the unit via a commercially
available network cable.
This method enables power to be supplied to the unit without the need for power supply wiring in environments where there
is no power supply outlet near the mounting location.
However, the following functions cannot be used during operation using a PoE++ power supply.
Clip recording/playback
Recording media initialization/update
Video output from the OPTICAL connector
Also, the pan/tilt acceleration is restricted.
Connect the unit and a PoE++ compatible power delivery device using a commercially available network cable.
A: Network cable
B: PoE++ compatible power delivery device
1
Check that the POWER lamp on the front of the unit changes from blinking green to solid green and that startup
has finished.
When the unit has started normally and connected to the network, the NETWORK lamp will light up green.
Note
2
To Next Page
Loading...
