88
GB
Notes on use
• You cannot use PC cards with a
power specification of 3V only.
• Do not insert other types of PC card
into the printer’s insertion slot. The
printer may be damaged.
• Do not drop, bend, or submit the
“Memory Stick” or PC card to
external shock.
• Do not disassemble or modify the
“Memory Stick” or PC card.
• Avoid getting liquids on the
“Memory Stick” or PC card or using
them in areas subject to high
humidity. Otherwise, data may be
rendered unreadable.
• Avoid using or storing the “Memory
Stick” or PC card in a location
subject to:
– extremely high temperature such as
the hot inside of a car or the
outdoors exposed to a direct
sunlight, or a place near a heater.
– direct sunlight
– high humidity
– corrosive substances
– excessive dust
– electrostatic or electronic noises
– magnetic fields
• Avoid touching the connector of the
“Memory Stick” or contacting it with
a metal object.
• When attaching a label to the
“Memory Stick” as specified in the
illustration, use the label supplied
for the “Memory Stick” only. Do not
use any other labels.
• When storing and carrying the
“Memory Stick” or PC card, keep it
in its original case to ensure
protection of important data.
• Avoid removing the “Memory Stick”
or PC card from the insertion slot or
turning off the power of the printer
while the printer is accessing the
“Memory Stick” or PC card.
Otherwise, data may be rendered
unreadable.
• When using a compact flash card or
Smart Media, use a commercially
available PC card adaptor that is
compatible with the card. Insert the
card into the adaptor and then insert
it into the printer. For how to install
the card and adaptor, refer to the
operating instructions of the PC card
adaptor.
• Avoid inserting or removing the
compact flash card or Smart Media
into or out of the PC card adaptor
while the PC card adaptor is inserted
in the printer. The data may be
rendered unreadable or erased.
About the “Memory Stick” and PC card media
To Next Page
Loading...
