Sony DPP--SV77 - Printing from Computer: Macintosh System Requirements; Macintosh Software Usage; Required Macintosh OS Versions; Required Macintosh Hardware

81
GB
Printing from your computer
Using your printer with Macintosh computers
The supplied software enables you to print an image from your Macintosh
with the Digital Photo Printer DPP-SV77. To print an image from the
computer, you need a commercially available printing software application.
System requirements
To use the supplied software, you need a Macintosh computer that must meet
the following system requirements.
OS: Mac OS 8.5.1/8.6/9.0/9.1 should be pre-installed.
Port: A USB port should be installed as standard.
RAM: 32 MB or more (64 MB or more is recommended.)
Hard disk space: 50 MB or more (depending on the number of copies to
be printed.)
Drive: CD-ROM drive (for software installation)
Notes
• We cannot guarantee the printer operations when a hub is used or when two or more
USB devices are connected to your computer.
• If you connect more than one DPP-SV77 printer at the same time, you cannot operate
the printer.
• You cannot operate the printer from another USB device being used simultaneously.
Installing the printer driver
Install the Sony DPP-SV77 Printer Driver Software Ver. 1.0 for Mac OS 8.5.1/
8.6/9.0/9.1 (“printer driver” in this manual) into your Macintosh.
1 Connect your Macintosh and the printer.
For the connections, refer to “Connecting to a computer (optional)” on
page 16.
2 Turn on the printer and start your Macintosh.
Note
Close all programs before running the installer.
Continued
All manuals and user guides at all-guides.com
all-guides.com