Getting
Started
Step
1:
Charging
the
battery
pack
DC
IN
jack
-_-/
You can charge the "lnfoLiTHIUM"
battery pack
(H
series) after
attaching it to your camcorder.
" Notes
• You cannot attach any "InfoLiTHIUM" battery
pack other than the H series to your camcorder.
1 Connect the
AC
Adaptor to the
DC
IN
jack on the Handycam
Station.
Be sure that
the.
mark on the DC plug
is facing up.
2 Connect the power cord (mains
lead) to the AC Adaptor and the
wall outlet (wall socket).
3 Turn the POWER switch
in
the
direction of the arrow to OFF
(CHG) (the default setting).
~/CHG
lamp
POWER switch
4 Attach the battery pack by sliding
it
in
the direction of the arrow
until it clicks.
5 Set the camcorder onto the
Handycam Station securely.
The
S.
ICHG
(charge) lamp lights up and
charging starts. The
!/CHG
(charge)
lamp turns
off
when the battery pack
is
fully charged. Remove the camcorder
from the Handycam Station.
To
remove
the
battery
pack
Tum
the POWER switch to OFF (CHG).
Slide the BATT (battery release) lever and
remove the battery pack.
BAn
(battery release) lever
o~·
~.;.ooorl
il":·~
,-"
.
.-JWQ)
•
us
9
To Next Page
Loading...
