Sony MHC-V6D - Page 36

MHC-V6D
36
8. When pressing the [ –PRESET–] button, “K 0 V0” is dis-
played on the fl uorescent indicator tube.
Screen display
9. Each time a button is pressed, “K 0” value increases. However,
once a button is pressed, it is no longer taken into account.
When pressing the all buttons, “K22” and “OK” are displayed
alternately
Screen display
10. “V0” value increases “V1”, “V2”, “V3” · · · “V8”, “V9”, “V0”
if turn the [VOLUME/DJ CONTROL] knob clockwise, or it
decreases “V9”, “V8”, “V7” · · · “V2”, “V1”, “V0” if turn the
knob counterclockwise.
Releasing method:
Press two buttons of the [ENTER] and [FOOTBALL] simultane-
ously for three seconds.
DVD COLOR SYSTEM CHANGE
It can change DVD color system into NTSC or PAL.
Procedure:
1. Press the [
?
/
1
] button to turn the power on.
2. Press the [FUNCTION] button to turn the DVD/CD function.
3. Press two buttons of the [PAN] and [LED COLOR] simultane-
ously for three seconds.
4. The message “COLOR NTSC” or “COLOR PAL”is displayed
on the fl uorescent indicator tube, and DVD color system
changed.
Screen display
or
5. When the “NTSC” mark is lights up, DVD color system is
NTSC.
When the “NTSC” mark is turns off, DVD color system is
PAL.
Screen display
MUSIC
NTSC
(Displayed characters in the above fi gure are example)
DVD SERVICE MODE
• This mode let you make diagnosis and adjustment easily by
using the remote commander and the TV. The instructions, di-
agnostic results, etc. are given on the on-screen display.
• TEST DISC LIST
Be sure to use the DVD disc that matches the signal standards
of your region.
• For CD
Part No. Description
3-702-101-01 DISC (YEDS-18), TEST
4-225-203-01 DISC (PATD-012), TEST
J-2501-307-A DISC (HLX-A1), TEST
• For DVD SL (Single Layer)
Part No. Description
J-6090-069-A DISC (HLX-503), TEST (NTSC)
J-6090-088-A DISC (HLX-504), TEST (NTSC)
J-6090-077-A DISC (HLX-506), TEST (PAL)
• For DVD DL (Double Layer)
Part No. Description
J-6090-071-A DISC (HLX-501), TEST (NTSC)
J-6090-089-A DISC (HLX-505), TEST (NTSC)
J-6090-078-A DISC (HLX-507), TEST (PAL)
• Procedure to enter to DVD Service Mode:
1. Press the [
?/1
] button to turn the power on.
2. Press the [FUNCTION] button to turn the DVD/CD function.
3. Press two buttons of the [WAH] and [LED COLOR] simulta-
neously for three seconds.
4. The message “SERVICE IN” appears on the fl uorescent in-
dicator tube and the Top Menu of Remocon Diagnosis Menu
appears on the on-screen display on the TV. The model name,
main unit’s micom version information (IF-con) and DVD
fi rmware version information (Syscon) are displayed at the
bottom of the on-screen display.
Remocon Diagnosis Menu
0. External Chip Check
1. Servo Parameter Check
2. Drive Manual Operation
3. Emergency History
4. Version Information
Model Name : V6D_GA
IF
– con : Ver. 01.02 (0000)
Syscon : Ver. 1.020
5. To execute each function, press its number by using numeric
button on the remote commander.
Releasing method:
Press the [
?/1
] button to turn the power off.