112
Key Priority Setting
Chapter 3 Signal Selection and Transitions
2
For each of <Priority1>, <Priority2>, <Priority3>, and <Priority4>, select
a key, to determine the key priority sequence.
The keys are inserted in the key priority sequence with priority 1 at the
front.
Note
It is not possible to select the same key for two or more priority numbers.
The keys appear in the set order on the program monitor.
Changing the key priority for after the transition
1
In the M/E or PGM/PST menu, select first VF7 ‘Misc,’ then HF4 ‘Next
Key Priority.’
The Next Key Priority menu appears.
2
For each of <Priority1>, <Priority2>, <Priority3>, and <Priority4>, select
a key, to determine the key priority sequence.
For details of the key priority sequence, see the figure shown for step 2 in
the previous item (see page 112).
The keys appear in the set order on the preview monitor.
3
Execute the transition.
The keys are rearranged in the set order on the program monitor.
1
2
3
4
Priority 1
Priority 2
Priority 3
Priority 4
To Next Page
Loading...
