193Resizer
Chapter 4 Keys
To apply color to a border
1
In the <Border Mode> group of the Border/Crop menu, press [Flat Color].
2
Adjust the following parameters.
To soften the inner edge of a border
1
In the Border/Crop menu, press [Border Soft].
2
Adjust the following parameters.
To apply a beveled light edge
1
In the <Border Mode> group of the Border/Crop menu, press [Beveled
Light Edge].
2
Adjust the following parameters.
3
Press [Border Soft].
2 V Simultaneously adjust width of top
and bottom borders
0.00 to 9.00
3 All Simultaneously adjust width of all
four borders
Value of H shown
5 Density Density of the borders 0.00 to 100.00
Knob Parameter Adjustment Setting Values
Knob Parameter Adjustment Setting Values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00
Knob Parameter Adjustment Setting Values
1 Inner Soft Border inner softness 0.00 to 100.00
Knob Parameter Adjustment Setting Values
1 Top Top edge –100.00 to +100.00
2 Left Left edge –100.00 to +100.00
3 Right Right edge –100.00 to +100.00
4 Bottom Bottom edge –100.00 to +100.00
5 All Four edges Value of Left shown
To Next Page
Loading...
