Chapter 9 Color Corrector
344
Color Corrector Functions
4
In the <Bound> group, make the settings for the three regions (Dark,
Middle, and Bright).
• [Level] parameters: set the boundaries of the three regions.
• [Soft] parameters: set the degree of boundary softness of the three
regions.
5
In the <Luminance Process Adjust> group, press [Dark], [Mid], or
[Bright], and adjust the following parameters for the three regions.
• In tint mode
• In color modify mode
3 Y Lift Curvature of curve –100.00 to +100.00
4 Y Dark Position of maximum point of
curve
–7.31 to +109.59
Knob Parameter Adjustment Setting values
Knob Parameter Adjustment Setting values
1 Over B Level Luminance level of the Over
Bright point
50.00 to 150.00
2 Mid B Level Luminance level of the Bright/
Middle point
10.00 to 120.00
3 Dark Mid
Level
Luminance level of the Middle/
Dark point
–20.00 to +90.00
4 Under D
Level
Luminance level of the Under
Dark point
–50.00 to +50.00
Knob Parameter Adjustment Setting values
1 Over B Soft Degree of softness at Over Bright
point
15.00 to 70.00
2 Mid B Soft Degree of softness at Bright/
Middle point
15.00 to 42.50
3 Dark Mid
Soft
Degree of softness at Middle/Dark
point
15.00 to 42.50
4 Under D Soft Degree of softness at Under Dark
point
15.00 to 70.00
Knob Parameter Adjustment Setting values
1 Luminance Luminance –100.00 to +100.00
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00
To Next Page
Loading...
