Sony PMW-EX30 - Page 34

34
Video Format and Input/Output Signals
Chapter 2 Preparations
a) “HDMI/CMPNT/SDI Out SEL” is disabled
and the setting value is fixed to 480i (576i)
when the “i.LINK I/O Select” setting of the
VIDEO SET menu is “DVCAM”.
b) 480i when “Country” of the OTHERS menu is
set to “NTSC Area”, or 576i when “Country”
of the OTHERS menu is set to “PAL Area”.
c) This setting allows no signal to be output from
the HD/SD SDI OUTPUT connector.
d) This format allows no signal to be output from
the HDMI connector.
Clip video format Output video format
“HDMI/CMPNT/SDI Out SEL” setting
a)
1080i/720P 1080i
480i (576i)
b)
480P (576P)
b) c)
NTSC HQ 1080/60i
SP 1080/60i
SP 1080/24P
1080/59.94i
(1080/49.95i)
480/59.94i
(576/49.95i)
480/59.94P
(576/50P)
HQ 1080/30P 1080/29.97PsF
(1080/49.95i)
HQ 1080/24P 1080/
23.98PsF
d)
(1080/49.95i)
1080/59.94i
(1080/49.95i)
HQ 720/60P
HQ 720/30P
HQ 720/24P
720/59.94P
(720/49.95i)
1080/59.94i
(1080/49.95i)
PAL HQ 1080/50i
SP 1080/50i
1080/50i
(1080/60i)
576/50i
(480/60i)
576/50P
(480/60P)
HQ 1080/25P 1080/25PsF
(1080/60i)
HQ 720/50P 720/50P
(720/60P)
1080/50i
(1080/60i)
HQ 720/25P 720/25PsF
(720/60P)