44
Using the IR Remote Commander (Supplied)
Chapter 2 Preparations
• When the backup is done, format the
“Memory Stick” with the device to be
used.
To use an SDHC card formatted
with this unit with other devices
having an SDHC card slot
• First make a backup copy of the data
recorded in the SDHC card.
• When the backup is done, format the
SDHC card with the device to be used.
Using the IR
Remote
Commander
(Supplied)
Before use
Before you use the supplied IR remote
commander for the first time, pull out the
insulation sheet from the battery holder.
A CR2025 lithium battery is set in the
holder at the factory.
To control this unit from the
IR remote commander
You can use the setup menu to enable and
disable the remote control function. The
factory default setting is enable.
To disable the function
Press the MENU button to display the menu
icons. Use the M, m, < or , button to
display the OTHERS menu ( ), and to
set “IR Remote” to “Off”.
The “IR Remote” setting is maintained after
this unit is turned off.
For details on menu operations, see “Basic Menu
Operations” (page 84).
• “Memory Stick” and
are trademarks of Sony Corporation.
• “Memory Stick PRO-HG Duo” and
are trademarks of
Sony Corporation.
Insulation sheet
To Next Page
Loading...
