Sony SLV-360 - Main Brake Assemblies S and T (Fig. 3-12)

3-10. MAIN BRAKE ASSEMBLIES S AND T
(Fig. 3-12)
1) Remove tension spring ©.
2) Remove stopper washer (2) @ to remove neutrality arm ©.
3) Remove pendulum compulsion arm @ and tension coil
spring ©.
4) Remove stopper washer (2) © to remove main brake S
assembly @.
5) Remove stopper washer (2) to remove main brake T
assembly ©).
[Note on Mounting]
+ Don’t touch brake shoes @ and @ with bare hand.
+ Apply FLOIL FG-055G (Jig Ref. No. J-12) to x marked
portions.
@® Pendulum compulsion arm
© Tension coil spring
@ Stopper washer (2)
© Stopper washer (2) @ Tension spring
@
Main
brake
S
assembly
®
Neutrality
arm
Stopper washer (2)
© Main brake T assembly
i Ne
(Gee
2
eae
yy
Each
1
drop
<i ay
=
Fig. 3-12