Sony SLV-360 - Trigger Lever and RKB Block Assemblies (Fig. 3-26)

3-24. TRIGGER LEVER AND RKB BLOCK
ASSEMBLIES (Fig. 3-26)
1) Remove timing belt. (Refer to 3-3.)
2) Remove CAP brake assembly. (Refer to 3-4.)
3) Remove cam motor chassis block assembly. (Refer to 3-16.)
4) Remove main slider. (Refer to 3-18.)
5) Remove tension spring (@) in the order @ to @ to remove
trigger lever assembly @.
6) Remove screws (3 x 8) @ to remove RKB block assembly
@.
[Note on Mounting]
* Apply FLOIL SG-055G (Jig Ref. No. J-12) to +x marked
portions on trigger lever assembly. (Fig. A)
@ Tension spring
@ Trigger lever assembly
~
~_——
@® Screws (3 x 8)
Trigger lever
assembly
Fig. 3-26
=34—
~n
©. N
/
, Grease
\ /
N 7