Sony SLV-360 - Page 97

3-22. TG1 ASSEMBLY (Fig. 3-24)
1) Set the mechanism to the loading-end condition referring to
1-1. (Cam gear indicates “LE”. (Refer to Fig. A and B of
Fig. 3-18.)
2) Remove tension spring © in the order @ to @.
3) Remove stopper washer (2) @ to pull out TG! assembly @).
[Note on Mounting]
+ Apply one drop of Diamond Oil NT-68 (Jig Ref. No. J-13) to
xx marked portion.
* Keep clean the felt side of TG1 assembly.
@ Tension spring
@ Stopper washer (2)
Ss
@ TG1 assembly
Fig. 3-24
Band =
Reel (S)