•
Input
Lets you select the source that is output to the
zone. Audio and video signals are output to
zone 2, only audio signals are output to zone 3.
o
-
':T
CD
~
..
Multi
Zone
menu
parameters
• Volume
Lets you adjust the volume
in
the zone.
"Main"
(this receiver) is always selected.
If you do not change the selling, proceed
to step
7.
audio'video signals, then press
G\
'D'
• Power
Lets you turn zone operation on.
o ON
o OFF
7 Press +'+,..
,.
repeatedly to
select item and parameter, then
press
8.
6 Press +'+ to select,
"ON"
or
"OFF," then press
8)
.
--1
Setting
audio/Video
output
signals
to
the
zone
2/zone
3
1 Make sure that the AMP button
is lit.
If
it
is
not lit,
or
"GUI
MODE"
is not
displayed in the display window
of
the
receiver, follow the steps given in "7:
Operating the receiver using the GUI
(Graphical User Interface)" (page 41).
2 Press MENU repeatedly to
display the QUI menu on the TV
screen.
3 Press +'+ repeatedly to select
"Settings," then press
8 or
•.
4 Press +'+ repeatedly to select
"Multi Zone," then press
8.
5 Press +'+ to select the zone to
which you want to output
continued-----
111
GB
To Next Page
Loading...
