Using
the
HDMI
CONTROL
function
for
'BRAVIA'
Theatre
Sync
'BRA
VIA'
Theatre Sync only supports a Sony
BRAVIA which offers the
'BRA
VIA'
Theatre
Sync function.
By connecting Sony components that are
compatible with the HDMI
CONTROL
function with a
HDMI
cable (not supplied),
operation is simplified as below:
• One-Touch Play: When you play back a
component such as a DVDlBlu-ray Disc
Player, the receiver and the
TV
are turned on
automatically and switch to the appropriate
HDMI input.
• System Audio Control: While watching
TV,
you can select to output the sound from the
TV speaker
or
the speakers connected to the
receiver.
• System Power Off:
When
you
tum
off
the
TV,
the receiver and connected components
are also turned off simultaneously.
HDMI
CONTROL
is a mutual control
function standard used by
HDMI
CEC
(Consumer Electronics Control) for
HDMI
(High-Definition Multimedia Interface).
The HOMI CONTROL function
does not work in the following
cases:
• When you connect the receiver to a
component which is not correspond with
Sony's HDMI CONTROL function.
• When you connect the receiver and
components using other than
HDMI
connection.
We recommend that you connect the receiver
to products featuring
'BRA
VIA'
Theatre
Sync.
'BRA
VIA'
and
BRA
V IA are trademarks
of
Sony Corporation.
Note
Depending on the connected component, the
HDMI
CONTROL
function may not work. See the
operating instructions
of
the component.
To Next Page
Loading...
