Watching
a
DVD
(One-Touch
Play)
By a simple operation (one-touch),
components connected to the receiver with
HDMI connections start automatically.
You can enjoy the sound/image using
connected components.
Play back a connected component.
The receiver and
TV
are turned on
simultaneously, and sound and image are
output from the receiver and TV.
Note
Depending on the TV, the start
of
the content may
not be output.
Watching a
DVD
by
simple
operation
You can also select a connected component,
such as a DVD player
or
Blu-ray Disc Player
using the
TV
menu. In this case, the receiver
and the
TV
switch to the appropriate
HDMI
input.
Enjoying
the
TV
sound
from
the
speakers
connected
to
the
receiver
(System
Audio
Control)
You can enjoy the TV sound from the speakers
connected to the receiver by a simple
operation.
Depending on the
TV
settings, while you are
watching the TV, the receiver turns on and
switches to the
"TV"
function automatically.
TV
sound is output from the speakers
connected to the receiver, and the volume
of
the
TV
is minimized simultaneously.
You can use the System Audio Control
function as follows.
• The sound
of
the
TV
is output from the
speakers connected to the receiver when you
turn the receiver on while the sound is being
output from the
TV
speaker.
•
You
can adjust the receiver's volume when
you adjust the
TV
volume.
You can also operate this function using the
TV
menu. For details, see the operating
instructions
of
the TV.
Notes
• When
"HDMI
Control"
is
set to
"ON,"
the
"HDMI
Audio" settings in the
HDMI
settings menu will set
automatically depending
on
the System Audio
Control settings.
• When you connect a
TV
that does not have System
Audio Control function, the System Audio Control
function does not work.
• If the TV
is
turned on before turning
on
the
receiver, the TV sound will not be output for a
moment.
To Next Page
Loading...
