Turning
off
the
receiver
with
the
TV
(System
Power
Off)
When you
tum
the TV offby using the power
button on the
TV's
remote, the receiver and
the connected components tum
off
automatically.
You can also use the receiver's remote to
tum
off the TV.
Press TV, then press AV
I/C).
The TV, receiver and connected components
are turned off.
Notes
• Set the
TV
power supply interlock function to
on
before using the System Power
Off
function.
For
details, see the operating instructions
of
the TV.
• Depending
on
the status, the connected
components may not be turned off.
For
details, see
the operating instructions
of
the connected
components.
• The location, label
of
the remote will vary
according to models and areas.
Troubleshooting
If
you experience any
of
the following
difficulties while using the HDMI CONTROL
function, use this troubleshooting guide to
help you remedy the problem.
The HDMI CONTROL function does not
work.
• Check the HDMI connection (page 3).
• Make sure
"HDMI
Control"
is
set to
"ON"
in HDMI settings menu.
• Make sure the connected component is
compatible with the HDMI CONTROL
function.
• Check the HDMI CONTROL settings on
the connected component. See the
operating instructions
of
the connected
component.
•
If
you change the HDMI connection,
connect/disconnect the AC power cord,
or
there is a power failure, repeat the
procedures
of
"Preparing for HDMI
CONTROL function" (page 4).
No sound is output from the receiver
and TV speaker while using the System
Audio Control function.
• Make sure the TV is compatible with the
System Audio Control function.
•
If
the TV does not have System Audio
Control function, set the "HDMI Audio"
settings in HDMI settings menu to
- "TV+AMP"
if
you want to listen to the
sound from the TV speaker and
receiver.
- "AMP"
if
you want to listen to the
sound from the receiver.
• You cannot listen to the sound
of
a
component connected to the receiver
while a TV is selected as the input on the
receiver.
- Change the input
of
the receiver to
HDMI when you want to watch a
program on a component connected to
the receiver.
continued~«
~~~~~
7
GB
To Next Page
Loading...
