5 Press the numeric buttons to
enter the channel number.
6 Press
8.
The
selected
channel
is tune in.
Presetting
the
channels
You
can
select the
channels
you
want
directly
by presclling thcm
using
thc presct numbers.
You can presct
up
to
30
XM
Radio
channels
and
3D
SIRIUS
Satellitc
Radio
channcls.
1 Make sure that the AMP button
is lit.
If
it is not lit,
or
"GUI
MODE"
is not
displayed in the display
window
of
the
receiver, follow the steps given in "7:
Operating
the receiver using the
GUI
(Graphical
User
Interface)"
(page
41).
2 Press
.,+
repeatedly to select
"XM" or "SIRIUS," then press
8 or
•.
3 Select a channel you want to
preset using Category Tuning
(page 87) or Direct Tuning
(page 88).
4 Press OPTIONS.
5 Press
+,+
to select "Memory,"
then press
8 to enter.
6 Press
.,+
repeatedly to select
the preset channel you want to
use as the preset channel, then
press
8.
Preset
channels
from I to
3D
are avai lable,
and a default channel is preset for all the
preset
channels
when
you purchase the
receiver.
The
selected channel is registered as the
preset channel
you
selected in step
3.
7 Repeat steps 3 to 6 to preset
another channel.
To select the preset channels
1 Repeat steps 1 and 2 of "Presetting the
channels".
2 Press +/+ to select the preset number
from the preset list, then press
8.
You
can
select stored preset
channels
from I to
3D.
Notes
• The channel information you have preset may be
changed
if
XM Satellite Radio Inc.
or
SIRIUS
Satellite Radio Inc. change their channel
programming.
• When the "Category Mode" screen
is
displayed.
press OPTIONS. then press
+1+
to select "Preset
Mode."
..
o
"l)
CD
...
a
o'
:::J
1/1
To Next Page
Loading...
