NOTE: Editing of users and proles are only available when logged-on as the administrator.
NOTE: Certain administrator attributes may not be edited.
NOTE: A prole cannot be deleted if a user is assigned that prole.
NOTE: A ‘lock’ icon indicates if the console is locked or any level of security is applied.
NOTE: Attempting to change any locked function causes the function focus to display
the locked icon.
NOTE: Passwords cannot be easily recovered if lost or forgotten.
USER PREFERENCES
This menu allows certain ‘operational characteristics’ of the console to be edited. Parameters
that may be adjusted are:
• BUTON brightness – brightness of LEDs behind rubber key buttons
• LED brightness – brightness of meters and LEDs around encoders
• FaderGlow™ brightness – brightness of FaderGlow™ bars
• LCD brightness – brightness of LCD backlight
• DOGS (Direct Out Gain Stabiliser) – Sets DOGS ON/OFF see DOGS for more details of
this function.
DOGS
Si DOGS (Direct Out Gain Stabiliser) is a tool to help maintain stored gain structure when
multiple devices are sharing a single source. When enabled, this facility adjusts the direct
output level from each channel inversely to any manual change of a mic gain control (within
the range of +16/-10db) on that channel. This allows the direct outputs to feed to a second
console, recording system or similar with the feed to the 2nd item not affected by user
changing the gain control.
The facility is turned ON/OFF globally from the PREFS menu with the offset cleared each
time a cue is recalled or the DOGS function is turned off.
NOTE: DOGS operates on a cue-by-cue basis against any manual adjustment to mic amp
gain, it is not an offset that offset that ripples through to subsequent uses.
NOTE: When disabling DOGS any offsets are reset which may result in an increase/
decrease in level on any systems fed from the Si Compact direct outputs.
NOTE: DOGS is intended for use live, DOGS offsets are NOT stored with any cue or cue
update.
To Next Page
Loading...
