Setting Oscillator and Monitor Patches
It is possible to change other output patches in the system from within the appropriate MENU:
OSC Oscillator re-patching is initiated from the OSC menu; the method is
as for bus output patches however the oscillator may only be patched
to only one destination.
MONITOR OUT It is possible to assign additional line outputs for the monitor L and
R from the MONITOR menu; the method is similar as for bus output
patches however the monitor left and right will be patched together
as a stereo pair and only one ‘paired’ destination is allowed.
Patching Replay Filtering
It is possible to isolate patching changes from the automation for the EDIT SHOW menu to prevent
the automation for changing system patching when a cue is recalled. To isolate an item scroll to
the desired list item, press the encoder and select Isolate.
To Next Page
Loading...
