© 2016 SPI Lasers UK Ltd.
Commercial in Confidence
SM-S00500 Revision A 21 October 2016
redPOWER QUBE Cased Fiber Laser User Manual
The QUBE Fiber Laser must be drained of all cooling water and the bungs fitted to all pipes
prior to shipment. If the QUBE Fiber Laser is shipped without the bungs fitted then any
residual cooling water will escape during transit and may cause permanent damage.
Pack the QUBE Fiber Laser in the original packaging and include all original accessories and
documentation as detailed in the original inventory. The correct and original packaging should
be used to prevent damage in transit. If all or part of the original packaging is unavailable,
contact SPI Lasers for replacement items. Please take time to complete all return
documentation, which can be obtained from SPI Lasers. Accurate details, diagnosis and
comments in the documentation reduce turnaround time for repair at SPI Lasers.
On request, SPI Lasers will supply a report detailing faults found and repairs carried out
necessary to return the QUBE Fiber Laser to full operational specification.
To Previous Page
Loading...