13 Reset sources
The general reset of the STM32H573I-DK board is active low. The reset sources include:
• The B2 reset button
• The embedded STLINK-V3EC
• The ARDUINO
®
Uno shield board through the CN14 ARDUINO
®
Uno V3 connector (pin 6).
• The STDC14 receiver (MIPI10)
• The TAG connector (CN1)
• The trace connector (MIPI20)
The general reset is connected to the following peripheral reset functions:
• STM32H573IIK3Q MCU reset
• Octo‑SPI flash memory reset
• Ethernet PHY reset
UM3143
Reset sources
UM3143 - Rev 1
page 22/53
To Next Page
Loading...
Need help?
General
