STIHL TS 460 3
1. Specifications
1.1 Engine STIHL single-cylinder two-stroke engine
with special impregnated cylinder bore
Displacement: 72.4 cm³
Bore: 48.0 mm
Stroke: 40.0 mm
Power output: 3.5 kW (4.75 bhp)
Max. permissible speed 9.600 r.p.m.
Idle speed: 2,500 r.p.m.
Bearings: Crankshaft supported in heavy-duty
deep groove ball bearings,
needle cages on small and
big ends
Connecting rod length: 70 mm
Rewind starter: Single pawl system with
automatic rope rewind
mechanism
Reserve pull on rope rotor: min. 1/2 turn of rope rotor
Starter rope: 4.5 mm dia., 1000 mm long
Clutch: Centrifugal clutch without linings
Diameter: 80 mm
Clutch engages at: 3,200 r.p.m.
Crankcase leakage test
at gauge pressure: p
ü
= 0.5 bar
under vacuum: p
u
= 0.5 bar
Silencing: Intake air silencer and
exhaust muffler
To Next Page
Loading...
