EasyManua.ls Logo

Stihl Cutquik TS 460 - Fuel System Specifications; Ignition System Details

Stihl Cutquik TS 460
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
STIHL TS 460 4
1.2
Fuel System
Carburetor: All position diaphragm
carburetor with integral
fuel pump
Standard setting
High speed adjusting screw H: Back off 1 turn
Low speed adjusting screw L: Back off 1 turn
(starting with the screws
tight against their
seats)
Carburetor leakage test at
gauge pressure: p
ü
= 0.8 bar
Fuel tank capacity: 0.95 I (950 cm 3)
Fuel mixture: Regular brand-name gasoline
(leaded or unleaded) and STIHL
two-stroke engine oil
Octane number: min. 90 RON
Mix ratio:
1:50
with STIHL two-stroke engine oil 50:1
1:25
with other brand-name
two-stroke engine oils
Air filter: Felt prefilter, large main filter
(paper filter cartrigde)
and auxiliary filter
1.3
Ignition System
Type: Electronic magneto
ignition (breakerless)
Air gap: 0.2-0.5 mm
Ignition timing: 2.8-3.2 mm B.T.D.C.
at 8,000 r.p.m.
Spark plug (suppressed): Bosch WSR 6 F or
NGK BPMR 7 A
Electrode gap: 0,5 mm
Spark plug thread: M14x1.25
Length of thread: 9.5 mm
Heat range: 200

Table of Contents

Related product manuals