Installation and commissioning
Instructions for use • AIDA C WD310 • AAB272_EN_V2.0_12-2021_IFU_CE-MDR 59
ð The created user has all the authorizations of the assigned group.
6.3.5
Settings as system administrator
The system administrator can make settings at operating system level. These include the
following areas, to name but some examples:
– System-related settings, such as domain and network settings
– Security-related settings, such as activation of access control
– Settings for user management, such as activation of group profiles. The group profiles
must be activated to allow the application administrator to create and edit additional
group profiles as well as the predefined default profile
– Configuration of the profile service, which distributes the default and group profiles to all
AIDA applications
– Configuration of the remote service
The table below provides an overview of the settings which the system administrator may
make:
Menu Tab Setting
General System Make domain settings
Make network settings
Make Windows desktop set-
tings
Make NTP settings
Make WLAN settings
Security Specify access control for dif-
ferent modules
Enable login banner
Format hard disk (D:)
Capture
Finish
Data Entry
Browser
User Management Role Management Assign user roles to definable
groups of people
Allow the creation of group
profiles
Authentication Enable automatic login for lo-
cal login
Enable automatic Windows
login
Enable automatic logout after
procedure finish
Enable automatic logout after
timeout
To Next Page
Loading...
