Storz AIDA C WD310 - Group Profile and Default Profile; Additional Installations

Installation and commissioning
Instructions for use • AIDA C WD310 • AAB272_EN_V2.0_12-2021_IFU_CE-MDR 63
Menu Tab Settings
Select video quality
Select video resolution
Specify how the complete
video should be divided into
sorted sub-sections
Remote Control Specify the assignment and
functioning of the remote
control
Watermark
Voice Control
Capture
Feedback
Finish Prechecked
Manual
Reports
Print Enable auto print
Select layout
Specify the number of images
per page
Data Entry User Interface
Team 1
Team 2
Instruments
Procedures Assign keywords
Staff groups
Browser Browser
6.3.8
Group profile and default profile
The system administrator can decide that only the supplied default profile should be used. The
default profile is automatically loaded following login and the configuration area appears.
A copy of the default profile is created as a basis for a group profile. Group profiles contain
fewer setting options than the default profile. Settings which affect the default profile are
marked by the colors orange or light blue on the input field.
Only settings without an orange or light blue marking can be assigned to a group profile.
The profile service is updated every 5minutes. KARLSTORZ recommends configuring settings
on one device at a time to avoid overwriting the settings.
6.4 Additional installations
Additional installations can be implemented on the system.