Operation
Instructions for use • AIDA C WD310 • AAB272_EN_V2.0_12-2021_IFU_CE-MDR 73
7.3 Current procedures
7.3.1
Patient
The
Patient
module is used to compile the outline data for the surgical procedure. This
includes the patient data, the performing physician, and the nature of the procedure.
1. Tap the
Patient
module.
2. Select the performing physician.
ð The settings for the current procedure are loaded.
3. Record the patient data manually or load it from the hospital information system or from a
worklist saved in the system.
4. Complete the mandatory fields in full. Incomplete data cannot be stored.
The scope of the fields depends on what scope of documentation was configured. Three
different input screens are available:
Simple entry
To Next Page
Loading...
