Storz AIDA C WD310 - Settings as Application Administrator

Installation and commissioning
Instructions for use • AIDA C WD310 • AAB272_EN_V2.0_12-2021_IFU_CE-MDR 60
Menu Tab Setting
Profile Service Enable profile service for au-
tomatic profile distribution
Set up profile service
Remote Service General Enable remote service
Set up remote service
6.3.6
Settings as application administrator
The application administrator can make application settings, such as the configuration of the
user interface. The application administrator can create and edit group profiles, provided that
the function was enabled by the system administrator.
The table below provides an overview of the settings which the application administrator may
make:
Menu Tab Settings
General User Interface Enable Onscreen Keyboard
Select country and language
variant
Select keyboard
Select startup module
Enter facility name
Enable home screen
Enable turnover measurement
timer
Content Specify available modules
Display Select screen type
Enable feedback for image
capture and video recording
Enable display input switch-
ing if there are two video
sources
DICOM Set up DICOM parameters
Enable and set the interface
to the DICOM Worklist
Provider
Enable and set the interface
to the MPPS Provider
Open Commits Display the active, ongoing,
open commits and their sta-
tus
Reports Select standard printer and
paper format for automatic
printing
System Display system information