4G+ROUTER1200 - User Guide
16
/
84
Copyright © STRONG 2024. All Rights Reserved.
16
/
84
7. Entering your PIN code in the Web UI
After inserting your sim card and switching on the device, you might need to connect to the Web UI
if you notice that the network signal LEDs are not lit and that the vertical arrows are white or red,
which can indicate that your SIM card is locked by the PIN code and/or not properly detected.
1. In this case, you must connect to the Wi-Fi of the device and access the Web UI.
2. When you are connected to the Web UI for the first time, you will see a warning message that
invite you to enter the PIN code by clicking the
connection
button.
To Next Page
Loading...
